No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



LACP/3/LAG_DOWN_REASON_SYS: Members of the LACP mode Eth-Trunk interface went down. (TrunkName=[STRING], Reason=[STRING])


The member interface of an Eth-Trunk interface in static LACP mode went Down.


Parameter Name Parameter Meaning
TrunkName Name of an Eth-Trunk interface in static LACP mode
Reason Reason why the member interface of an Eth-Trunk interface in static LACP mode went Down

Possible Causes

Operations on the local end or external events caused the member interface of an Eth-Trunk in static LACP mode to go Down.


  1. Troubleshoot the fault based on the reasons listed in the log.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 91979

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next