No relevant resource is found in the selected language.
MENU
Support Documentation
AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007 Log Reference

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFPDT/4/IF_SYNTYPE

IFPDT/4/IF_SYNTYPE

Message

IFPDT/4/IF_SYNTYPE:The working mode of [STRING1] has changed to [STRING2] type.

Description

The working mode of the synchronous serial interface was changed to DTE or DCE.

Parameters

Parameter Name Parameter Meaning

[STRING1]

Indicates the name of the interface whose working mode was changed.

[STRING2]
Indicates the changed working mode:
  • DTE: indicates that the interface functions as a DTE interface.
  • DCE: indicates that the interface functions as a DCE interface.

Possible Causes

Cause 1:

The synchronous serial interface was removed and inserted.

Cause 2:

The cable connector was changed.

Cause 3:

The working mode of the synchronous serial interface alternated between asynchronous mode and synchronous mode.

Procedure

  • This log message is informational only, and no action is required.

Translation
简体中文
Download
Updated: 2020-12-16

Document ID: EDOC1000097209

Views: 276000

Downloads: 226

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :