No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP/4/SET_IGMP_GLBPLC_FAIL

IGMP/4/SET_IGMP_GLBPLC_FAIL

Message

IGMP/4/SET_IGMP_GLBPLC_FAIL:In VPN instance "[vpn-instance-name]", failed to set the IGMP global application policy. (FlCode=[STRING][ULONG])

Description

Failed to set the IGMP application policy on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to deliver the interface application policy when IGMP was configured on the interface.

Procedure

  1. Run the undo igmp enable command and reconfigure IGMP on the interface.
  2. If this log message is generated after each reconfiguration, contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 83545

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next