No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



WLAN/3/WLAN_LOG_USER(l)[0]: [WLAN_STA_INFO_AP_ASSOCIATE] ACMAC: [STRING1]; ACNAME: [STRING2]; APMAC: [STRING3]; APNAME: [STRING4]; USER: [STRING5]; MAC: [STRING6]; TIME: [ULONG1]; ZONE:UTC [STRING7] ERRCODE: [ULONG2]; RESULT: FailType is Status code, Requested authentication algorithm not supported


A STA failed to go online because the authentication algorithm requested by the STA is not supported by the AP.


Parameter Name Parameter Meaning
[STRING1] MAC address of an AC.
[STRING2] AC system name.
[STRING3] MAC address of an AP.
[STRING4] AP system name.
[STRING5] STA name.
[STRING6] MAC address of the STA.
[ULONG1] System time.
[STRING7] Time zone and DST.
[ULONG2] Failure/Status error code.

Possible Causes


The authentication algorithm requested by the STA was not supported by the AP.


  1. This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 136018

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next