No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ADP-IPSEC/4/Add_NHRP_Peer_To_IPSec_Fail

ADP-IPSEC/4/Add_NHRP_Peer_To_IPSec_Fail

Message

ADP-IPSEC/4/Add_NHRP_Peer_To_IPSec_Fail: NHRP notified IPSec of a failure to add peer. (NBMA address: [STRING], Ifindex: [ULONG] , error code: [ULONG])

Description

NHRP notified the IPSec module of a failure to add an NHRP peer.

Parameters

Parameter Name Parameter Meaning
NBMA address Indicates the NBMA address.
Ifindex Indicates the interface ID.
error code Indicates the returned error code.

Possible Causes

After an IPSec profile was applied to a tunnel interface, NHRP notified the IPSec module of a failure to add an NHRP peer.

Procedure

  1. Check whether the configuration is correct.
  2. If so, collect log messages and contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 71432

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next