No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MFIB/4/DOWNNUM_EXCEED_RESTORE:The number of downstream interfaces in the entry ([source-address], [group-address])'s downstream list falls below the set limit. The limit on the number of downstream interfaces is [OIF_LIMIT]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])


The number of downstream interfaces in an MFIB entry fell below the set limit.


Parameter Name Parameter Meaning
[source-address] Source address
[group-address] Group address
[OIF_LIMIT] Limit on the number of downstream interfaces in an MFIB entry.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn VPN name
FileLine Name of the source code file and the line number of this log message

Possible Causes

The number of downstream interfaces in an MFIB entry fell below the set limit.


  • This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 136870

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next