No relevant resource is found in the selected language.
MENU
Support Documentation
AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007 Log Reference

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/5/CIRC_STATE_SET

ISIS/5/CIRC_STATE_SET

Message

ISIS/5/CIRC_STATE_SET:The status of the ISIS [process-id] interface is [interface-state]. (interface=[STRING])

Description

The log message was generated when the IS-IS interface status was changed.

Parameters

Parameter Name Parameter Meaning

[process-id]

Indicates the ID of an IS-IS process.

[interface-state]
The status of the IS-IS interface.

  • MTU UP

  • MTU DOWN

  • IP UP

  • IP DOWN

  • LINK UP

  • LINK DOWN

interface

Indicates the name of an interface.

Possible Causes

reset isis all

isis enable

Procedure

  1. This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2020-12-16

Document ID: EDOC1000097209

Views: 274705

Downloads: 226

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :