No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



GRESM/3/TokenConflict: Tokens resources conflicted when a specified token was applied for. (OldAppId=[ULONG], TokenHandle=[ULONG], NewAppId=[ULONG], TunnelID=[ULONG])


When being saved to the slave main control board, the token resource allocated to a service module conflicted with the token resource being used by another service module on the slave main control board.


Parameter Name Parameter Meaning
OldAppId ID of the service module that is using the token resource.
TokenHandle Token space address.
NewAppId ID of the service module to which the token resource is allocated.
TunnelID Tunnel ID.

Possible Causes

The token resource allocated to the service module had the same token ID as the token resource being used by another service module on the slave main control board.


  • Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 128446

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next