No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/ISSU_SMB_CMD_ERR:The SMB failed to run Command ([command]).


Failed to run the command on the SMB.


Parameter Name Parameter Meaning
[command] Indicates the command fails to be run.

Possible Causes

Failed to run the command on the SMB.


  1. Run the display current-configuration ospf command to check whether configurations on the AMB and SMB are the same. If so, go to Step 3; if not, go to Step 2.
  2. If some commands are only used on the AMB, configure them on the SMB.
  3. Contact contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 134391

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next