No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP/4/ASPATH_EXCEED_MAXNUM

BGP/4/ASPATH_EXCEED_MAXNUM

Message

BGP/4/ASPATH_EXCEED_MAXNUM:The number of AS-PATHs exceeded the limit([limit-value]). (Operation=[STRING])

Description

The number of AS_Paths exceeded the maximum value.

Parameters

Parameter Name Parameter Meaning
[limit-value] Indicates the maximum number of AS_Paths.
Operation Indicates related operations.
  • Discarding routes: The NLRI will be treated as Withdraw.
  • Using the aggregation command without as-set: Routes are summarized without AS-set.
  • Failing to make a policy effective: The policy will not work.

Possible Causes

  • The maximum number of AS_Paths supported is too small.
  • The AS_Path attribute in the received routes is too long.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, check whether the maximum number of AS_Paths supported is too small.

    • If the maximum number of AS_Paths supported is too small, go to Step 3.
    • If whether the maximum number of AS_Paths supported is too small cannot be determined or the maximum number is normal, go to Step 4.

  3. Run the as-path-limit [ as-path-limit-num ] command in the BGP view to configure an appropriate maximum number of AS_Paths supported.
  4. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 84629

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next