No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V/3/CEOUTOFRANGE

L2V/3/CEOUTOFRANGE

Message

L2V/3/CEOUTOFRANGE: The local CE cannot communicate with the remote CE because the CE ID exceeds the range. (Local: CeId=[ULONG], VpnRd=[STRING]; Remote: CeId=[ULONG], Pe=[STRING], VpnRd=[STRING])

Description

The local CE cannot communicate with the remote CE because the CE ID exceeds the range.

Parameters

Parameter Name Parameter Meaning
Local: Indicates the local device.
CeId Indicates the local CE ID.
VpnRd Indicates the local VPN Route Distinguisher (RD).
Remote: Indicates the remote device.
CeId Indicates the remote CE ID.
Pe Indicates the IP address of the remote PE.
VpnRd Indicates the remote VPN RD.

Possible Causes

When the Kompella VLL is configured, the ID of the local CE was beyond the range on the remote CE.

Procedure

  1. Change the ID of the local CE to be smaller one or extend the range on the remote CE.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 85880

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next