Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/3/INVALID_DSTEMOD
Message
ISIS/3/INVALID_DSTEMOD:IS-IS obtained incorrect information about the DS-TE mode from RM. (ProcessId=[USHORT], ModeInfo=[ULONG])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
ProcessId |
Indicates the ID of an IS-IS process. |
ModeInfo |
Indicates the DS-TE mode. |
Possible Causes
1. An error occurred in the callback function between IS-IS and the RM.
2. An error occurred in MPLS processing.
Procedure
-
Re-configure the DS-TE mode in the MPLS view. Check whether the
corresponding log is displayed.
If IS-IS successfully obtains the DS-TE mode information, go to Step 2.
If IS-IS fails to obtain the information after several reconfigurations, go to Step 3.
- Services are not affected, and no action is required.
- Collect log information and configuration information, and then contact technical support personnel.