No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MLD/4/SET_MLD_INTPLC_FAIL

MLD/4/SET_MLD_INTPLC_FAIL

Message

MLD/4/SET_MLD_INTPLC_FAIL:In VPN instance "[vpn-instance-name]", failed to set the MLD application policy for interface [interface-name]. (FlCode=[STRING][ULONG])

Description

Failed to set the MLD application policy on the interface.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[interface-name] Indicates the name of an interface.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

Failed to deliver the interface application policy when MLD was configured on the interface.

Procedure

  1. Run the undo mld enable command and reconfigure MLD on the interface.
  2. If this log message is generated after each reconfiguration, contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 72204

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next