No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IKE/4/DYNA_PEER_MAX

IKE/4/DYNA_PEER_MAX

Message

IKE/4/DYNA_PEER_MAX:The number of dynamic peers of the [STRING] type has reached the maximum value.

Description

The number of dynamic IKE peers that the device creates has reached the maximum value.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the IPSec policy type.
  • ISAKMP: ISAKMP mode
  • Template: policy template mode

Possible Causes

The number of dynamic IKE peers that the device creates has reached the maximum value because IKE peers can be referenced in different IPSec policies.

Procedure

  • Delete unnecessary IPSec tunnels.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 91837

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next