No relevant resource is found in the selected language.
MENU
Support Documentation
AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007 Log Reference

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
KEYCHAIN/6/KEYCH_KEY_DEFAULT_I

KEYCHAIN/6/KEYCH_KEY_DEFAULT_I

Message

KEYCHAIN/6/KEYCH_KEY_DEFAULT_I:In keychain [keychain-name], the status of default send key-id [key-id] is changed to send inactive.

Description

Status of default send key-id is changed to inactive in a keychain.

Parameters

Parameter Name Parameter Meaning
keychain-name Keychain name
key-id Key-id

Possible Causes

1. When a default send key-id is un-configured when it is active.

2. When a keystring is un-configured for default send key-id when it is active.

3. When a key-id is un-configured which is marked as default and is active.

Procedure

  1. This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2020-12-16

Document ID: EDOC1000097209

Views: 274287

Downloads: 226

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :