No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



AAA/6/DOMAIN_BLOCK:The domain [STRING] is changed from active to blocked because the current time is within the blocking period.


The current time is included in the block period; therefore, the domain status is changed from activated to blocked.


Parameter Name Parameter Meaning
[STRING] Indicates the domain name.

Possible Causes

The current time is included in the block period configured by state block time-range, so the domain status is changed from activated to blocked.


  1. If you want to activate a domain, perform either of the following operations:

    • Run the state block time-range command to change the block period.
    • Run the undo state block time-range command to delete the block period.

  2. After the block period expires, the domain status automatically changes from blocked to activated.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 128617

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next