Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CM/0/USER_ADDACLFAIL
Message
CM/0/USER_ADDACLFAIL: The ACL cannot be added for NAC users. Ensure that this ACL is supported by the NAC service. ([STRING])
Possible Causes
- The delivered ACL is not included in the RADIUS attribute document.
- The ACL failed to be delivered to the physical chip because of the chip error.
Procedure
- Run the display access-user user-id user-number command to check whether the authorized ACL is supported according to the RADIUS attribute document.
- If not, deliver the ACL included in the RADIUS attribute document to the user. Run the display access-user user-id user-number command to check whether the ACL is delivered successfully.
- If so, the ACL fails to be delivered to the physical chip. Go to step 2.
- Contact technical support personnel.