No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP/4/ARP_DUPLICATE_IPADDR

ARP/4/ARP_DUPLICATE_IPADDR

Message

ARP/4/ARP_DUPLICATE_IPADDR:Received an ARP packet with a duplicate IP address from the interface. (IpAddress=[IPADDR], InterfaceName=[STRING], MacAddress=[STRING])

Description

Received an ARP packet with a conflictive IP address from the interface.

Parameters

Parameter Name Parameter Meaning
IpAddress Indicates the conflicting IP addresses.
InterfaceName Indicates the name of an interface.
MacAddress Indicates a MAC address.

Possible Causes

The source IP address of the ARP packet was the same as the IP address of the interface that received the ARP packet.

Procedure

  1. Check whether another interface in the network is configured with the same IP address.
  2. Check whether the interface was attacked.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 69694

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next