No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIP/6/RIP_NBR_DEL

RIP/6/RIP_NBR_DEL

Message

RIP/6/RIP_NBR_DEL: RIP Neighbor is deleted from the interface. (ProcessId=[ULONG], Interface=[STRING], Neighbor=[IPADDR], Reason=[STRING])

Description

A RIP neighbor is deleted from the interface.

Parameters

Parameter Name Parameter Meaning

ProcessId

ID of a RIP process

Interface

Interface name

Neighbor

IP address of a neighbor

Reason

Reason for deleting a RIP neighbor

Possible Causes

The RIP neighbor may be deleted due to the following reasons:
  • The RIP neighbor interface went Down or was deleted.
  • Configurations of similar versions were changed.
  • Information about the BFD session in the Down state was received.
  • The timer expired.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 85279

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next