No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



EFM/4/TRIGGERIFNET:EFM trigger interface. (InterfaceName=[STRING], Result=[STRING])


The service of interface was blocked by the EOAM 3AH module.


Parameter Name Parameter Meaning
InterfaceName Indicates the name of an interface.
Result Indicates the Status of fault. The detailed information is as followings:
  • Trigger interface up means fault recovery

  • Trigger interface down means fault occurrence

Possible Causes

The interface service block function of 802.3AH was configured, and 802.3AH sense the fault.


  1. Check the configurations at both ends of the link.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 127518

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next