No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP/6/GR_SUP_NBR_MRESTONOR

RSVP/6/GR_SUP_NBR_MRESTONOR

Message

RSVP/6/GR_SUP_NBR_MRESTONOR:RSVP GR neighbour state changed from maybe-restarting to normal on the supporting node. (NeighbourAddress=[IPADDR])

Description

The GR status on the RSVP supporting node changed from maybe-normal to normal.

Parameters

Parameter Name Parameter Meaning
NeighbourAddress Indicates the address of the restarting neighbor.

Possible Causes

Before the timer expired, the local node did not receive the Hello message sent from the neighbor, and thus the local node judged that the neighbor was performing GR. After receiving the Hello message sent from the neighbor, the local node changed the neighbor status.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 83356

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next