Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PPP/4/PAPAUTHFAIL
Message
PPP/4/PAPAUTHFAIL:On the interface [interface-name], PPP link was closed because PAP authentication failed.
Possible Causes
Cause 1:
The authentication time timed out.
Cause 2:
The number of authentication failures exceeded the maximum.
Cause 3:
The PAP control block in the PPP control block was null.
Procedure
- Solution to cause 1:
Change the cable or the interface to ensure that the link is of good quality.
- Solution to cause 2:
Use the ppp pap command to reconfigure user names and passwords on both ends and ensure that the user names and passwords on both ends are the same.
- Solution to cause 3:
Collect log information and configuration information, and then contact technical support personnel.
Previous
