No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/4/PEER_DWN_SYSTYP_UNKN
ISIS/4/PEER_DWN_SYSTYP_UNKN
Message
ISIS/4/PEER_DWN_SYSTYP_UNKN:ISIS [process-id] neighbor [neighbor] was Down on interface [interface-name] because the system type was unknown. The Hello packet was received at [hello-time] last time; the maximum interval for sending
Hello packets was [max-interval]; the local router sent [send-number] Hello packets and received [receive-number] packets; the type of the Hello packet was [packet-type].
Description
The IS-IS neighbor went Down on the interface because the system type was unknown.
Parameters
Parameter Name
Parameter Meaning
[process-id]
Indicates the ID of an IS-IS process.
[neighbor]
Indicates the system ID of a neighbor.
[interface-name]
Indicates the name of an interface.
[hello-time]
Indicates the time when a Hello packet was received last time.
[max-interval]
Indicates the maximum interval for sending Hello packets.
[send-number]
Indicates the number of Hello packets that were sent.
[receive-number]
Indicates the number of Hello packets that were received.
[packet-type]
Indicates the type of the Hello packet. The type can be
P2P: indicates the P2P Hello packet.
Lan Level-1: indicates the Hello packet in the Level-1 broadcast network.
Lan Level-2: indicates the Hello packet in the Level-2 broadcast network.
Possible Causes
The unknown system type of the neighbor caused the IS-IS neighbor to become Down.
Procedure
Run the display diagnostic-information command and save the command output; contact technical support personnel.