Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN/4/AP_MEMORY_OVERLOAD
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[STRING] |
Indicates the AP's recorded information and CPU usage, in the following format: APID=0,AP Mac=0a-0b-0c-00-05-00,MemOccupanceRate=78 |
Possible Causes
1.
The device has issued configurations to the AP.
2.
The service traffic volume on the AP was large.
Procedure
- Check whether the memory usage of the AP can be automatically
restored to the normal range.
Wait for a period of time, and then run the display ap-performance-statistic command to check whether the memory usage is lower than 80%.
- If the memory usage is lower than 80%, the AP can automatically recover, which implies that the configurations issued to the AP increased the AP's memory usage. No action is required.
- If the memory usage is still higher than 80%, the AP cannot automatically recover, which implies that the service traffic volume on the AP was too large or the AP is damaged. Go to step 2.
- Contact technical support personnel.