No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RSVP/6/MAX_SESSION_REACH:Reached the maximum value of session [maximum].


The number of sessions reached the maximum.


Parameter Name Parameter Meaning
[maximum] Indicates the maximum number of sessions.

Possible Causes

The number of sessions reached the maximum during the creation of sessions.


  1. Run the display mpls rsvp-te session ingress-lsr-id tunnel-id egress-lsr-id command to check for unwanted sessions. If some sessions are unwanted, delete them. If all sessions are needed, contact technical support personnel for expansion.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 84348

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next