No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/SINTF_NSR_EVENT: Shamlink interface of the [board-name] received event [event], and NSR state changed from [previous-state] to [current-state]. (DestIp=[STRING], SourceIp=[IPADDR], ProcessId=[USHORT], AreaId=[STRING])


Only the AR3200 series support NSR.


The NSR state of an interface over a sham link on a master or slave main control board changed.


Parameter Name Parameter Meaning
[board-name] Indicates the master or slave main control board on which the interface over the sham link resides.
[event] Indicates the event that triggers the NSR state change of the interface over the sham link.
[previous-state] Indicates the original NSR state.
[current-state] Indicates the new NSR state.
DestIp Indicates the destination IP address of the sham link.
SourceIp Indicates the source IP address of the sham link.
ProcessId Indicates the ID of the process to which the interface over the sham link belongs.
AreaId Indicates the ID of the area to which the interface over the sham link belongs.

Possible Causes

Packets were exchanged or the exchange was disabled during data backup between the interfaces over sham links on the master and slave main control boards.


  1. This log is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 128112

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next