Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/CONFLICT_ROUTERID_INTER
Message
OSPF/6/CONFLICT_ROUTERID_INTER: OSPF Router id conflict maybe occur on inter-area. (ProcessId=[USHORT], RouterId=[IPADDR])
Description
The router IDs of OSPF devices in different areas might conflict because external routes were constantly refreshed.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| ProcessId | Indicates the ID of a process. |
| RouterId | Indicates the ID of a router. |
Possible Causes
The same router ID was configured for devices in different areas, causing route flapping.
This log is generated in the following scenarios:
- Normal scenario: Device A generates a Type 5 LSA and floods it to Device B. Due to a fault, Device A restarts and reestablishes the neighbor relationship with Device B. Then, Device A receives the Type 5 LSA generated by itself from Device B. Because the router ID in the LSA conflicts with the local one, the log is generated. A large number of Type 5 LSAs may exist in the system. Therefore, this scenario is common. The log generated in this scenario requires no action.
- Conflict scenario: The same router ID is configured for devices in different areas, causing route flapping.