No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V/3/OTHERCEIDSAME

L2V/3/OTHERCEIDSAME

Message

L2V/3/OTHERCEIDSAME:When inserting RLB into VPN, found the same remote CE ID RLB already existed. (CeId=[ULONG], Old Rlb: Pe=[STRING], Rd=[STRING]; New Rlb: Pe=[STRING], Rd=[STRING])

Description

An RLB with the same remote CE ID already existed when the RLB was inserted into VPN.

Parameters

Parameter Name Parameter Meaning
CeId Indicates the ID of the CE.
Old Rlb: Pe Indicates the IP address of the PE in the original RLB.
Rd Indicates the route distinguisher of the original label block.
New Rlb: Pe Indicates the IP address of the PE in the new RLB.
Rd Indicates the route distinguisher of the new label block.

Possible Causes

The local site ID was the same as the remote site ID.

Procedure

  1. Re-configure the two site IDs.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 71467

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next