No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PIM/6/SRC_MASK_UNSUPPORTED:In VPN instance [vpn-instance-name], the length of the mask of the source address [source-address]/[source-mask-length] in the Join/Prune message was unsupported, so this source was ignored. (FlCode=[STRING][ULONG])


The source address contained in the Join/Prune message was ignored, because PIM-SM did not support the mask length of the source address.


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[source-mask-length] Indicates the mask length of source address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The PIM-SM-enabled interface receives a Join/Prune message, the mask length of the source address contained in which is not supported by PIM-SM.


  • This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 134314

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next