No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PKI/4/GET_LOCAL_CERT_ERR: Realm [realm_name] failed to get local certificate through [protocol].


Failed to obtain the local certificate through SCEP.


Parameter Name Parameter Meaning
[realm_name] Specifies the name of the PKI realm.
[protocol] Specifies the protocol type: SCEP.

Possible Causes

Failed to obtain the local certificate through SCEP.


  1. Run the ping command to check whether the connection to the service client works. If no, check basic configurations such as the Router interface.
  2. If the connection is proper but the file cannot be obtained, check PKI configurations.
  3. If the fault cannot be located, enable the debugging of the PKI module to query the debugging information.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 127248

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next