No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SSH/4/STELNET_SERVER

SSH/4/STELNET_SERVER

Message

SSH/4/STELNET_SERVER:The STELNET server is not started. Use the command' stelnet server enable' to start it.

Description

The STelnet service was disabled on the server when the SSH client requested the STelnet service.

Parameters

None

Possible Causes

The STelnet service was disabled on the server when the SSH client requested the STelnet service.

Procedure

  1. Enable the STelnet service on the server.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 85501

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next