No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SSH/4/STELNET_SERVER
SSH/4/STELNET_SERVER
Message
SSH/4/STELNET_SERVER:The STELNET server is not started.
Use the command' stelnet server enable' to start it.
Description
The STelnet service was disabled on the server when
the SSH client requested the STelnet service.
Parameters
None
Possible Causes
The STelnet service was disabled on the server when
the SSH client requested the STelnet service.