No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/VINTF_NSR_EVENT

OSPF/6/VINTF_NSR_EVENT

Message

OSPF/6/VINTF_NSR_EVENT: Virtual link interface of the [STRING] received event [STRING], and NSR state changed from [STRING] to [STRING]. (NbrID=[STRING], IpAddr=[IPADDR], ProcessId=[USHORT], TransitAreaId=[STRING])

NOTE:

Only the AR3200 series support NSR.

Description

The NSR state on an OSPF virtual-link interface on the AMB or SMB changed.

Parameters

Parameter Name Parameter Meaning
[STRING] AMB or SMB to which a virtual-link interface belongs
[STRING] Event causing the NSR state of the virtual-link interface to change
[STRING] Previous NSR status of the virtual-link interface
[STRING] New NSR status of the virtual-link interface
NbrID ID of a neighboring router
IpAddr IP address of the virtual-link interface
ProcessId ID of the process to which the virtual-link interface belongs
TransitAreaId ID of the transit area to which the virtual-link interface belongs.

Possible Causes

When the data on OSPF NSR interfaces was backed up, an OSPF virtual-link interface on the AMB communicated with an OSPF vitual-link interface on the SMB or the communication between the two interfaces was interrupted.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 72063

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next