No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/4/TRAP_VIF_CFG_ERR

OSPF/4/TRAP_VIF_CFG_ERR

Message

OSPF/4/TRAP_VIF_CFG_ERR:Virtual interface configuration error has occurred. (ProcessId=[USHORT], RouterId=[IPADDR], Area=[IPADDR], Neighbor=[IPADDR], ErrorType=[ULONG], PacketType=[ULONG])

Description

The virtual interface was incorrectly configured.

Parameters

Parameter Name Parameter Meaning
Process ID Indicates the ID of an OSPF process.
RouterId Indicates the ID of a router.
Area Indicates the ID of an area.
Neighbor Indicates the IP address of a neighbor.
ErrorType Indicates the error type.
PacketType Indicates the packet type.

Possible Causes

The virtual interface was incorrectly configured.

Procedure

  1. Run the display ospf vlink command to check the authentication configuration of the virtual interface.
  2. Contact contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 94661

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next