Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN/Notice/APNTOF13
Message
WLAN/Notice/APNTOF1:AP-[ULONG1] change from normal to fault:\r\nMAC = [UCHAR1]-[UCHAR2]-[UCHAR3]-[UCHAR4]-[UCHAR5]-[UCHAR6], Sysname:[STRING1], Reason: unknown.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [ULONG1] | AP ID. |
| [UCHAR1]-[UCHAR2]-[UCHAR3]-[UCHAR4]-[UCHAR5]-[UCHAR6] | MAC address of the AP. |
| [STRING1] | AP system name. |
Possible Causes
Cause:
The AP status changes to fault for a reason other than the AP restart, AP deletion, country code change, AP information change, license expiration, restart of APs of a specified type, carrier change, link switchover, and inconsistency between the IP address used by the AP for going online and statistically configured IP address.
Previous
