No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP/6/NOTIFY_LSPM_GR_END

RSVP/6/NOTIFY_LSPM_GR_END

Message

RSVP/6/NOTIFY_LSPM_GR_END:RSVP GR ends.

Description

RSVP notified LSPM that RSVP GR ended.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

1. Before the active/standby switchover, the GR capability was not configured on the device.

2. No LSP existed on the device.

3. The neighboring node did not have the RSVP GR supporting capability.

4. GR was complete.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 68328

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next