No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RSVP/3/NBR_NO_GR_PATH:Received a path message from neighbor [neighbor-address], but the neighbor was not enabled GR.


A Recovery Path message received from the neighbor that was not enabled with GR.


Parameter Name Parameter Meaning
[neighbor-address] Indicates the neighbor address.

Possible Causes

The local node could help the downstream neighboring node to perform GR. When the downstream neighboring node was performing GR, the GR supporting capability or Hello detection was disabled on the local node.


  1. Check whether the neighbor needs to be enabled with the RSVP GR supporting capability.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 127008

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next