No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SOCKET/1/BINDPEERIP:Failed to bind the peer IP because a socket with same state already existed.


Failed to bind the peer IP address because a socket in the system had the same status as that of the current socket.


Parameter Name Parameter Meaning
None None

Possible Causes

1. The peer IP address was repeatedly set.

2. The system had a socket with the same local IP address, local port number, remote IP address, remote port number, and VPN index as that of the socket to be set.


  1. The log is generated when the system faces an unknown fault. The fault causes the relevant routing protocol unavailable. Then you need disable the routing protocol and then enable it.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 126082

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next