No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



VRRP/4/STATEWARNINGEXTEND:Virtual Router state [State], because of [Reason]. (Interface=[STRING], VrId=[ULONG], InetType=[STRING])


When the VRRP status changed, the following information is logged, the interface name, status change, and reason of the status change.


Parameter Name Parameter Meaning
[State] Status change, which can be:

1. "INITIALIZE changed to MASTER"

2. "BACKUP changed to MASTER"

3. "MASTER changed to BACKUP"

4. "MASTER changed to INITIALIZE"

5. "MASTER changed to NOTACTIVE"

[Reason] Status change reason, which can be:
  1. priority calculation
  2. protocol timer expired
  3. track interface
  4. track BFD session
  5. link BFD session down
  6. link BFD session up
  7. link BFD session deleted
  8. peer BFD session down
  9. interface up
  10. interface down
  11. create notactive
  12. create initialize
  13. standby deleted
  14. BFD configure deleted
  15. EFM configure deleted
  16. EFM session down
  17. EFM session up
  18. ignore interface down
  19. interface deleted
  20. status backup from the AMB to SMB
  21. ipsec-instance configure deleted
  22. ipsec-instance down
  23. ipsec-instance up
  24. CFM configure deleted
  25. CFM session up
  26. other
Interface Interface name
VrId VRID of the VRRP backup group
InetType Network type

Possible Causes

Cause 1: The device or the link was faulty.

Cause 2: The device or the link was recovered.

Cause 3: The configuration changed.


  1. If the device was faulty, check the status of the interface configured with VRRP.
  2. If the link was faulty, check the status of the link configured with VRRP.
  3. If the device or the link was recovered, no action is required.
  4. If the configuration changed, check the VRRP configuration.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 134256

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next