No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PKI/5/CONFIRM_AUTOLAOD_PEER_CERT: The peer certificate [peer-name] auto load failed.


The digital certificate of the remote device fails to be loaded.


Parameter Name Parameter Meaning


Indicates the name of the digital certificate of the remote device.

Possible Causes

The digital certificate has been deleted.

The digital certificate fails to be read.


  1. Run the display pki peer-certificate command to check whether the digital certificate of the remote device exists.

    • If the digital certificate of the remote device exists, go to step 2.
    • If the digital certificate of the remote device does not exist, re-import the digital certificate of the remote device.

  2. Collect relevant information and contact technical support personnel.
  3. End.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 134326

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next