Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/SHAMLINK_IF_CHG_E
Message
OSPF/6/SHAMLINK_IF_CHG_E:Shamlink interface [shamlink-interface-address] received event [interface-event], interface state changed from [interface-previous-state] to [interface-current-state]. (ProcessId=[USHORT])
Description
The interface on the sham link [Slink-int] changed from the state [pre-state] to the state [cur-state] after receiving an event [event].
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [shamlink-interface-address] | Indicates the IP address of the interface on the shamlink link. |
| [interface-event] | Indicates the events on the interface. |
| [interface-previous-state] | Indicates the previous status of the interface. |
| [interface-current-state] | Indicates the current status of the interface. |
| ProcessId | Indicates the ID of an OSPF process. |
Previous
