No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PIM/4/BACKUPJP_NORP:In VPN instance "[vpn-instance-name]", when trying to send a (*, [group-address]) Join message, PIM cannot obtain the RP. (FlCode=[STRING][ULONG])


The PIM failed to obtain the RP when trying to send a Join message (*,G).


Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[group-address] Indicates the group address.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

The RP is not backed up to the slave board, causing the PIM unable to find the RP after the GR process.


  1. Run the display pim [ vpn-instance vpn-instance-name | all-instance ] rp-info command to check whether the RP exists.
  2. Run the static-rp or c-rp command in the PIM view to configure the RP.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 126411

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next