Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/6/DEL_LKINFO_CSPF_FAIL
Message
ISIS/6/DEL_LKINFO_CSPF_FAIL:ISIS [process-id] failed to delete the TE link information from CSPF. (ReturnValue=[ULONG], NeighborSystemId=[STRING], NeighborPseudoNodeId=[USHORT], NodeStatus=[USHORT], FragmentNumber=[USHORT])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[process-id] |
Indicates the ID of an IS-IS process. |
ReturnValue |
Indicates a returned value. |
NeighborSystemId |
Indicates the system ID of a neighbor. |
NeighborPseudoNodeId |
Indicates the pseudo node ID of a neighbor. |
NodeStatus |
Indicates the status of a node. |
FragmentNumber |
Indicates the fragment number. |
Procedure
-
Run the display mpls te cspf destination command
to check whether there are paths that meet specified restriction conditions.
If not, go to Step 2.
If so, go to Step 3.
- Collect log information and configuration information, and then contact technical support personnel.
- This log message is informational only, and no action is required.