No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RSVP/3/LSP_EXCEED_PAF_LIC:Number of LSPs to be recovered given by LSPM exceeded actual PAF licence number. (GivenNumber=[ULONG])


The number of LSPs to be restored reached the maximum value specified in the License.


Parameter Name Parameter Meaning


The number of LSPs to be restored.

Possible Causes

The local node was configured with self-GR. During the active/standby switchover and GR, the number of LSPs in the License was modified to a value smaller than the number of current LSPs in the SMB.


  1. This log message is informational only, and no action is required.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 126138

Downloads: 188

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next