No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/3/GR_IF_CHANGE

OSPF/3/GR_IF_CHANGE

Message

OSPF/3/GR_IF_CHANGE:OSPF [process-id] exited GR mode as interface status changed. (InterfaceName=[STRING], IpAddress=[IPADDR])

Description

The OSPF process exited from GR because the interface status changed.

Parameters

Parameter Name Parameter Meaning
[process-id] Indicates the ID of an OSPF process.
InterfaceName Indicates the name of interface.
IpAddress Indicates the IP address.

Possible Causes

The OSPF process exited from GR because the interface status changed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 84663

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next