No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP/4/ROUTPRIX_EXCEED

BGP/4/ROUTPRIX_EXCEED

Message

BGP/4/ROUTPRIX_EXCEED:Routes received from peer [neighbor-address] including the number of prefix [receive-prefix-number] exceeded the max number of prefix [max-prefix-number]. (BgpAddressFamily=[STRING])

Description

The number of prefixes received from a peer exceeded the maximum value.

Parameters

Parameter Name Parameter Meaning
[neighbor-address] Indicates the IP address of a neighboring router.
[receive-prefix-number] Indicates the number of prefixes received from the neighboring router.
[max-prefix-number] Indicates the maximum number of IP prefixes.
BgpAddressFamily Indicates the flag of a BGP address family. The flags are divided into public flags and VPN flags.

Possible Causes

The number of routes received from a peer exceeded the maximum value.

Procedure

  1. Check the topology and the configuration of the network, and check whether excessive routes are caused by the requirements of actual applications or incorrect topology configuration.
  2. If excessive routes are caused by the requirements of actual applications, modify the configuration of the peer route-limit command.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 91791

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next