No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ISIS/6/ENABLE_TE_LV2_FAIL:ISIS [process-id] failed to enable TE for Level-2.


IS-IS failed to enable TE for the Level-2 interface.


Parameter Name Parameter Meaning
[process-id] Indicates the ID of an IS-IS process.

Possible Causes

Failed to enable TE for the Level-2 interface.


  1. Run the display this command in a specified IS-IS process to check whether a NET is configured. If no NET is configured, configure a NET.
  2. Run the traffic-eng command in a specified IS-IS process to re-enable TE.
  3. Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 135917

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next