No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/4/VLINK_NBR_CHG_E:Virtual link peer event: neighbor status changed. (ProcessId=[USHORT], VirtualLinkNeighborAddress=[IPADDR], NeighborEvent=[STRING], NeighborPreviousState=[STRING], NeighborCurrentState=[STRING])


The status of the neighboring node on the virtual link changed.


Parameter Name Parameter Meaning
ProcessId Indicates the ID of an OSPF process.
VirtualLinkNeighborAddress Indicates the IP addresses of neighboring nodes on the virtual link.
NeighborEvent Indicates the events received by the neighboring node.
NeighborPreviousState Indicates the previous status of the neighboring node.
NeighborCurrentState Indicates the current status of the neighboring node.

Possible Causes

The status of the neighboring node on the virtual link changed.


  1. Run the display ospf peer command to check the status of the neighbor.
  2. Contact contact technical support personnel.
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 135932

Downloads: 189

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next