No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP/3/LSP_DOESNOT_EXIST

RSVP/3/LSP_DOESNOT_EXIST

Message

RSVP/3/LSP_DOESNOT_EXIST:LSP did not exist. (EgressAddress=[STRING], SessionId=[USHORT], IngressAddress=[STRING], LspId=[USHORT])

Description

The LSP did not exist.

Parameters

Parameter Name Parameter Meaning
EgressAddress Indicates the egress address.
SessionId Indicates the session discriminator.
IngressAddress Indicates the ingress address.
LspId Indicates the LSP ID.

Possible Causes

During the active/standby switchover, the LSP was not backed up to the SMB after GR.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 70482

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next