No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R007

This document supports all the logs of device, including the parameters, meaning, possible causes and solution.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP/6/INST_ENTRY

IGMP/6/INST_ENTRY

Message

IGMP/6/INST_ENTRY:In VPN instance "[vpn-instance-name]", IGMP discarded the received report ([source-address], [group-address]) because the number of IGMP group memberships in this VPN instance reached the limit. The current statistical number of IGMP group memberships is [statistical-number]. (FlCode=[STRING][ULONG])

Description

The received IGMP Report message was discarded because the number of IGMP entries in the instance reached the upper limit.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates the source address.
[group-address] Indicates the group address.
[statistical-number] Indicates the upper limit of the number of IGMP entries.
FlCode Indicates the name of the source code file and the line number of this log message.

Possible Causes

In the case that the current instance was configured with the IGMP limit, when the number of IGMP entries in the instance reached the limit, the received IGMP Report message was discarded.

Procedure

  1. If services are not affected, no action is required.
  2. If services are affected, run the limit number command in the VPN instance IGMP view to increase the maximum number of IGMP entries that can be created in the VPN instance.
  3. If increasing the maximum number is not allowed due to the processing capability limit of the system, Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-05-29

Document ID: EDOC1000097209

Views: 69870

Downloads: 181

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next